AP Racing Radi CAL Competition Brake Kit 9660 G8X M3 M4
$5,524.00
Part #: 13.01.10046 Brand: Essex & AP Racing Complete front Essex Designed AP Racing Radi-CAL Competition Brake Kit for the F80 M3 & F82 M4: Features AP Racing CP9668 Radi-CAL Pro5000R six piston calipers 372x34mm, 84 vane AP Racing disc…
Description
Complete front AP Racing by Essex Radi-CAL Competition Brake Kit for the F87 M2 and M2 Competition, F80 M3, F82 M4:
- Saves 26 lbs. of unsprung weight vs. the OEM M2 Competition front brake package!
- Clears 19″ OEM wheels without a spacer, and many aftermarket 18″ wheels
- Features AP Racing CP9660 Radi-CAL Pro5000R six piston calipers
- 372x34mm, 72 vane AP Racing disc
- Saves roughly 10 unsprung lbs. from the nose vs. the standard OEM iron brake package
- Every component designed to resist the heat of extended track sessions
- Pistons sized properly to allow for seamless integration with OEM master cylinder and ABS system
- Designed to work with OEM rear brakes or our Essex/AP Racing rear BBK
Fits: Front (2017+ BMW F8X M Iron Discs)
Advantages Over OEM Brake System
Our CP9660/372mm Radi-CAL Competition Brake Kit offers our customers the following advantages over the OEM brake system:
- Saves 26 lbs. of unsprung weight vs. the OEM M2 Competition front brake package!
- Approximately 10 lbs. of unsprung weight reduction vs. the OEM standard front iron brake package
- AP Racing Radi-CAL calipers are the stiffest, lightest, and most technologically advanced calipers available at any price
- CP9660 calipers use a 18mm thick, commonly available brake pad shape
- Ventilated, domed back, stainless steel pistons keep heat out of the brake fluid and provide an ultra-firm pedal
- Mitigation of pad knockback via anti-knockback springs behind the caliper pistons
- Anodized caliper finish that is resistant to wear and deterioration at elevated temperatures
- Stainless steel caliper hardware for a long caliper service life under frequent pad change conditions
- High temperature, low drag seals that will hold up to track temps= less rebuilding and longer service life
- No dust boots to burn up
- Simple pad change with two bolts or quick-change spring clip, no caliper removal required
- Lifetime professional caliper rebuilding support by Essex (at a fee)- pull off your calipers, send them to us, we clean, inspect, and rebuild them
- Available disc burnishing service ensures that your kit arrives ready to be installed and driven hard immediately
- Championship winning, 72 vane, fully floating, AP Racing J Hook racing discs with 12 attachment points to hat
- Anti-knockback/anti-rattle disc attachment hardware
- Replacement iron disc rings available at an extremely competitive replacement price
- Disc metallurgy specifically designed to handle the temps typically seen on track offer a long service life
- Highest quality, Spiegler stainless steel brake line with clear sheath that reduces compliance over OEM rubber design
Additional information
Weight | 95 lbs |
---|---|
Dimensions | 23 × 20 × 15 in |
Add Brake Pads | DS2500, DS1.11, DS3.12, DSuno |
Reviews
There are no reviews yet.